您现在的位置:首页>>中心>>安规测试及认证>>CE认证>>正文
在线咨询

欧盟LVD指令新协调标准清单2014年5月

欧盟LVD指令新协调标准清单2014年5月

  • 本站
  • 2014-06-20
  • 法规
  • 已浏览

2014年5月16日,欧盟在官方公布了原LVD指令(2006/95/EC)新的协调标准清单(OJ C 149, 16.5.2014, p. 33–141)。

其中2013年出版的协调标准如下表所示。

表中第四栏的

“DOC”为“被替代标准的推断符合性中止期”:

对于新版标准,到达该日期,被替代标准(旧版标准)及其增补件将不再具有推断符合性;

对于标准的增补件,达到该日期,标准必须与此增补件一起使用,才具有推断符合性。

我们从表中也可以看出,在欧盟,一般新标准与旧标准的过渡期为三年,譬如2013年发布的标准,其执行日期通常为2016年。

标准编号

标准名称

采用国际标准

DOC

EN ISO 11252:2013

Lasers and laser-related equipment — Laser device — Minimum requirements for documentation

ISO 11252:2013

EN 50085-1:2005/A1:2013

Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements

2016-05-20

EN 50117-1:2002/A2:2013

Coaxial cables — Part 1: Generic specification

2016-06-17

EN 50117-2-1:2005/A2:2013

Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz

2016-07-01

EN 50117-2-2:2004/A2:2013

Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz

2016-07-01

EN 50117-2-3:2004/A2:2013

Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks — Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz

2016-07-01

EN 50117-2-4:2004/A2:2013

Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz

2016-07-01

EN 50117-2-5:2004/A2:2013

Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz

2016-07-01

EN 50117-4-1:2008/A1:2013

Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 — Indoor drop cables for systems operating at 5 MHz - 3 000 MHz

2016-06-17

EN 50288-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification

2016-03-18

EN 50288-2-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables

2016-03-18

EN 50288-2-2:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables

2016-03-18

EN 50288-3-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables

2016-03-18

EN 50288-3-2:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables

2016-03-18

EN 50288-4-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables

2016-03-18

EN 50288-4-2:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables

2016-03-18

EN 50288-5-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables

2016-03-18

EN 50288-5-2:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables

2016-03-18

EN 50288-6-1:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables

2016-03-18

EN 50288-6-2:2013

Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables

2016-03-18

EN 50290-2-23:2013

Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables

2016-09-16

EN 50290-2-25:2013

Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables

2016-09-16

EN 60061-1:1993/A49:2013

Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps

IEC 60061-1:1969/A49:2013

2016-04-02

EN 60061-2:1993/A46:2013

Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 2: Lampholders

IEC 60061-2:1969/A46:2013

2016-04-02

EN 60061-3:1993/A47:2013

Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 3: Gauges

IEC 60061-3:1969/A47:2013

2016-04-02

EN 60127-4:2005/A2:2013

Miniature fuses — Part 4: Universal modular fuse-links UMF — Through-hole and surface mount types

IEC 60127-4:2005/A2:2012

2016-01-11

EN 60127-7:2013

Miniature fuses — Part 7: Miniature fuse-links for special applications

IEC 60127-7:2013

EN 60143-2:2013

Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks

IEC 60143-2:2012

2016-01-15

EN 60252-1:2011/A1:2013

AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guidance for installation and operation

IEC 60252-1:2010/A1:2013

2016-10-03

EN 60252-2:2011/A1:2013

AC motor capacitors — Part 2: Motor start capacitors

IEC 60252-2:2010/A1:2013

2016-10-03

EN 60335-2-2:2010/A1:2013

Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

IEC 60335-2-2:2009/A1:2012

2015-12-20

EN 60335-2-6:2003/A13:2013

Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

2015-11-20

EN 60335-2-7:2010/A1:2013

Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines

IEC 60335-2-7:2008/A1:2011 Modified

2015-11-20

EN 60335-2-17:2013

Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances

IEC 60335-2-17:2012

2015-04-30

EN 60335-2-27:2013

Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

IEC 60335-2-27:2009 Modified

2014-11-21

EN 60335-2-34:2013

Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors

IEC 60335-2-34:2012

2015-06-27

EN 60432-3:2013

Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps non-vehicle

IEC 60432-3:2012

2015-08-08

EN 60519-4:2013

Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations

IEC 60519-4:2013

2016-07-24

EN 60519-10:2013

Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

IEC 60519-10:2013

2016-03-29

EN 60519-12:2013

Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations

IEC 60519-12:2013

EN 60529:1991/A2:2013

Degrees of protection provided by enclosures IP Code

IEC 60529:1989/A2:2013

2016-10-03

EN 60598-2-8:2013

Luminaires — Part 2-8: Particular requirements — Handlamps

IEC 60598-2-8:2013

2016-06-03

EN 60598-2-11:2013

Luminaires — Part 2-11: Particular requirements — Aquarium luminaires

IEC 60598-2-11:2013

2016-06-20

EN 60598-2-12:2013

Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights

IEC 60598-2-12:2013

2016-06-03

EN 60598-2-24:2013

Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures

IEC 60598-2-24:2013

2016-07-24

EN 60670-1:2005/A1:2013

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements

IEC 60670-1:2002/A1:2011 Modified

2017-12-31

EN 60670-24:2013

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment

IEC 60670-24:2011 Modified

EN 60688:2013

Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals

IEC 60688:2012

EN 60695-2-10:2013

Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure

IEC 60695-2-10:2013

EN 60695-11-10:2013

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

IEC 60695-11-10:2013

2016-06-25

EN 60934:2001/A2:2013

Circuit-breakers for equipment CBE

IEC 60934:2000/A2:2013

2016-02-22

EN 60947-2:2006/A2:2013

Low-voltage switchgear and controlgear — Part 2: Circuit-breakers

IEC 60947-2:2006/A2:2013

2016-03-07

EN 60947-5-5:1997/A11:2013

Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function

2015-12-03

EN 60950-1:2006/A2:2013

Information technology equipment — Safety — Part 1: General requirements

IEC 60950-1:2005/A2:2013 Modified

2016-07-02

EN 60968:2013

Self-ballasted lamps for general lighting services — Safety requirements

IEC 60968:2012

2015-10-31

EN 60974-2:2013

Arc welding equipment — Part 2: Liquid cooling systems

IEC 60974-2:2013

2016-02-28

EN 60974-5:2013

Arc welding equipment — Part 5: Wire feeders

IEC 60974-5:2013

2016-06-27

EN 60974-7:2013

Arc welding equipment — Part 7: Torches

IEC 60974-7:2013

2016-02-28

EN 61010-2-201:2013

Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment

IEC 61010-2-201:2013

2016-04-01

EN 61034-2:2005/A1:2013

Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements

IEC 61034-2:2005/A1:2013

2016-05-26

EN 61195:1999/A1:2013

Double-capped fluorescent lamps — Safety specifications

IEC 61195:1999/A1:2012

2015-11-16

EN 61199:2011/A1:2013

Single-capped fluorescent lamps — Safety specifications

IEC 61199:2011/A1:2012

2015-11-01

EN 61347-1:2008/A2:2013

Lamp controlgear — Part 1: General and safety requirements

IEC 61347-1:2007/A2:2012

2016-01-01

EN 61347-2-9:2013

Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps excluding fluorescent lamps

IEC 61347-2-9:2012

2015-12-04

EN 61439-4:2013

Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites ACS

IEC 61439-4:2012

2015-12-20

EN 61535:2009/A1:2013

Installation couplers intended for permanent connection in fixed installations

IEC 61535:2009/A1:2012

2015-06-20

EN 61557-10:2013

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures

IEC 61557-10:2013

2016-06-03

EN 61557-14:2013

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures —Part 14: Equipment for testing the safety of electrical equipment of machinery

IEC 61557-14:2013

EN 61558-2-14:2013

Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers

IEC 61558-2-14:2012

EN 61558-2-16:2009/A1:2013

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units

IEC 61558-2-16:2009/A1:2013

2016-09-16

EN 61558-2-26:2013

Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes

IEC 61558-2-26:2013

EN 61643-21:2001/A2:2013

Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods

IEC 61643-21:2000/A2:2012

2015-08-31

EN 61730-1:2007/A2:2013

Photovoltaic PV module safety qualification — Part 1: Requirements for construction

IEC 61730-1:2004/A2:2013

2016-04-18

EN 62026-2:2013

Low-voltage switchgear and controlgear — Controller-device interfaces CDIs — Part 2: Actuator sensor interface AS-i

IEC 62026-2:2008 Modified

EN 62026-7:2013

Low-voltage switchgear and controlgear — Controller-device interfaces CDIs — Part 7: CompoNet

IEC 62026-7:2010 Modified

EN 62031:2008/A1:2013

LED modules for general lighting — Safety specifications

IEC 62031:2008/A1:2012

2015-12-03

EN 62040-1:2008/A1:2013

Uninterruptible power systems UPS — Part 1: General and safety requirements for UPS

IEC 62040-1:2008/A1:2013

2016-02-14

EN 62196-1:2012/A11:2013

Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements

2017-10-15

EN 62196-2:2012/A11:2013

Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles —Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories

2017-10-15

EN 62395-1:2013

Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements

IEC 62395-1:2013

2016-10-14

EN 62444:2013

Cable glands for electrical installations

IEC 62444:2010 Modified

2016-09-23

EN 62606:2013

General requirements for arc fault detection devices

IEC 62606:2013 Modified

HD 60269-2:2013

Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons fuses mainly for industrial application — Examples of standardized systems of fuses A to K

IEC 60269-2:2013 Modified

2016-08-15

HD 60269-3:2010/A1:2013

Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons fuses mainly for household and similar applications — Examples of standardized systems of fuses A to F

IEC 60269-3:2010/A1:2013

2016-03-05

|<< << < 1 2 > >> >>|

返回顶部
认证信息检索:
站内搜索.. 模糊搜索:

广朋咨询服务有限公司© 版权所有

客服热线: 020-8148 6695, 8165 9395 传真: 020-8165 9395; Skype: liyun_01 E-mail: mike@gptek.com.cn

在线咨询互动服务: 客服1 互动服务: 客服2 粤ICP备14072239号